A kitchen fit-out cost in Dubai runs from about AED 10,000 to 17,000 for a small galley kitchen in laminate, AED 25,000 to 48,000 for a mid-range L-shaped kitchen, and AED 50,000 to 98,000 or more for a villa kitchen with an island, before appliances. Cabinets are the biggest line, followed by the worktop, then hardware, sink and tap. Below, each part is priced on its own, then added up for three typical Dubai kitchens, so you can check any quote line by line.
Key takeaways
- Cabinets are priced per linear metre and usually take the largest share of the budget.
- Worktops are priced per square metre, plus cut-outs, edges and fitting.
- Hardware is where cheap kitchens fail: ask which brand of hinges and drawer runners the quote includes.
- A like-for-like replacement usually needs only a building management permit; moving the sink or walls needs more approvals.
- Re-facing cabinet doors and changing the worktop can cost far less than a new kitchen.
Kitchen Fit-Out Cost in Dubai at a Glance
| Kitchen | Typical spec | Cost before appliances |
|---|---|---|
| Studio or 1-bed galley (3 m run) | Laminate doors, mainstream quartz, standard sink and mixer | AED 9,800–17,100 |
| 2-bed L-shape (5 m base, 4 m wall, 1 tall unit) | PU lacquer doors, mainstream quartz, corner unit, bin system | AED 25,200–47,600 |
| Villa kitchen with island (8.4 m base, 4 m wall, 1.8 m tall) | Wood veneer base, premium quartz, pull-out pantry | AED 50,600–97,700 |
These totals are worked out from the price tables below, using the low and high end of each range. They include supply and installation of cabinets and worktops, but not appliances, tiling, plumbing or electrical changes, or permits.
Kitchen Cabinets Price in Dubai, Per Linear Metre
Cabinets are priced per linear metre of run: measure along the wall where the units sit. Base units cost more than wall units because they carry the worktop, drawers and sink. The door finish drives most of the difference.
| Door finish | Base units (AED per linear metre) | Wall units (AED per linear metre) |
|---|---|---|
| Laminate | 1,500–2,200 | 1,000–1,500 |
| Thermofoil (PVC membrane) | 1,600–2,300 | — |
| Acrylic high gloss | 2,000–2,800 | — |
| PU lacquer | 2,300–3,200 | 1,500–2,100 |
| Aluminium frame with glass | 2,500–3,500 | — |
| Wood veneer | 2,800–4,500 | — |
| Solid wood and European brands | 4,500–9,000+ | — |
Prices are supplied and installed, from M&A Technical’s October 2026 guide. Tall units, such as an oven housing or pantry, run AED 2,000–2,800 per metre in laminate and AED 2,800–3,800 in PU lacquer. Basic flat-pack laminate can start lower; one Dubai joinery lists starting prices of AED 450–600 per metre for laminate base cabinets, and quotes at that level may leave out hardware, delivery or installation.
What the cabinet box is made of matters as much as the door. In a Dubai kitchen, ask for moisture-resistant MDF or HDF, or marine plywood around the sink, because standard MDF swells when it gets wet. Check the edge banding too: a gap along an edge lets steam in.
Quartz Worktop Price in Dubai and Other Materials
Worktops are priced per square metre of finished top. A standard 60 cm deep worktop gives about 0.6 m² for every metre of run, so a 3 m galley needs roughly 1.8 m².
| Material | Installed price (AED per m²) | Good to know |
|---|---|---|
| Granite | 600–1,000 | Hard-wearing and heat resistant; needs sealing |
| Quartz, mainstream | 800–1,400 | Most common choice; keep hot pans off it |
| Quartz, premium European | 1,500–2,500 | Branded slabs with more colours and finishes |
| Porcelain or sintered stone | 1,500–3,000 | Heat and stain resistant; thin profiles |
Source: Domeco, August 2026. The extras are where worktop quotes grow:
- Undermount sink cut-out with polished edge: AED 300–800
- Drop-in sink cut-out: AED 150–350
- Hob cut-out: AED 150–400
- Tap hole: AED 50–150 each
- Mitred edge (looks thicker): AED 150–400 extra per running metre
- A 30 mm slab costs about 30–50% more than 20 mm of the same stone
Marble is beautiful but stains and etches easily, so most fitters steer working kitchens toward quartz or granite.
Kitchen Hardware, Sinks and Taps
Hardware is a small share of the bill and a large share of the problems. Cheap hinges sag, and cheap runners stick within a year. Ask which brand the quote includes, and whether drawers are full-extension and soft-close.
| Item | Typical cost (AED) |
|---|---|
| Soft-close hinge | 25–120+ each |
| Soft-close drawer runners | 150–600+ per drawer |
| Magic corner system | 1,200–5,000+ |
| Pull-out pantry unit | 2,500–10,000+ |
| Waste bin system | 400–2,500+ |
| Bottle pull-out | 500–2,500+ |
| Cutlery organiser | 150–800+ |
| Standard stainless steel sink | 300–1,500 |
| Granite composite sink | 800–4,500+ |
| Undermount sink | 1,000–5,000+ |
| Standard kitchen mixer | 250–1,200 |
| Pull-out kitchen mixer | 800–3,500+ |
Source: Renovate UAE, June 2026. Many cabinet quotes include basic hinges and runners in the per-metre price; upgrades to branded soft-close systems are often extra.
How the Three Example Kitchens Add Up
Each total is the sum of the low and high ends of the ranges above.
| Line item | Galley (laminate) | L-shape (PU lacquer) | Villa with island (veneer) |
|---|---|---|---|
| Base units | 3 m: 4,500–6,600 | 5 m: 11,500–16,000 | 8.4 m: 23,520–37,800 |
| Wall units | 3 m: 3,000–4,500 | 4 m: 6,000–8,400 | 4 m: 6,000–8,400 |
| Tall units | — | 0.6 m: 1,680–2,280 | 1.8 m: 5,040–6,840 |
| Worktop | 1.8 m² quartz: 1,440–2,520 | 3 m² quartz: 2,400–4,200 | 6 m² premium quartz: 9,000–15,000 |
| Sink and hob cut-outs | 300–750 | 450–1,200 | 450–1,200 |
| Sink | 300–1,500 | 800–4,500 | 1,000–5,000 |
| Tap | 250–1,200 | 800–3,500 | 1,500–6,000 |
| Storage hardware | — | Corner unit and bin: 1,600–7,500 | Pantry, corner and bin: 4,100–17,500 |
| Total (AED) | 9,790–17,070 | 25,230–47,580 | 50,610–97,740 |
Costs Outside the Kitchen Fit-Out Quote
A joinery quote covers cabinets and often the worktop. These usually sit outside it:
- Appliances: a mid-range integrated appliance set costs about AED 15,000–30,000; premium brands run AED 50,000–100,000.
- Removing the old kitchen: worktop removal and disposal is about AED 300–800; waste disposal for a full strip-out about AED 800–2,500.
- Moving the sink or plumbing: about AED 8,000–20,000, and it changes which permits you need.
- Electrical changes: new circuits for an oven, hob or extra appliances should be done by a DEWA-approved contractor.
- Finishes: backsplash tiling or a glass splashback, and any wall or floor repairs found once the old units come out.
Together with the fit-out, these make up the full kitchen renovation cost in Dubai, which is why renovation guides quote higher totals than joinery quotes.
Do You Need a Permit for a Kitchen Fit-Out in Dubai?
It depends on whether the layout changes. New cabinets in the same position usually need only a building management or developer work permit or NOC. Moving the kitchen, relocating the sink or removing a wall needs an authority permit as well: Dubai Municipality for most mainland areas, or Trakhees in zones such as Palm Jumeirah, Jumeirah Islands and Al Furjan.
Developer NOC fees are typically about AED 2,000–5,000, with a refundable deposit of about AED 2,000–20,000. For the full picture, see our guide to renovation permits in Dubai.
Re-Face or Replace: The Cheaper Route
If the cabinet boxes are sound, you can keep them and change what you see. Re-facing means new doors and drawer fronts, new handles and hinges, and often a new worktop. It costs roughly AED 600–1,400 per linear metre, against AED 1,500 or more for new laminate units, and it takes two to three days on site instead of weeks.
Re-facing suits landlords refreshing a flat between tenants, and kitchens where the layout works. It is not worth it if the boxes are swollen around the sink, or if you are changing the layout.
How Long a Kitchen Fit-Out Takes
A small to medium kitchen usually takes three to six weeks from approved drawing to handover. Most of that is workshop manufacture, typically two to four weeks for made-to-measure units, while installation on site takes three to five days. Imported European kitchens take longer, often 8 to 14 weeks. Add time for building permits, and longer still if the layout changes.
What to Check in a Kitchen Fit-Out Quote
- Measurements in linear metres for base, wall and tall units, listed separately
- The board used for carcasses, especially under the sink
- The door finish and edge banding
- Hinge and runner brand, soft-close and full-extension
- Worktop material, thickness, edge profile and every cut-out
- Whether sink, tap, removal of the old kitchen and disposal are included
- Who handles the building permit and any authority approvals
- Lead time and installation days
- Warranty on manufacture and installation
Kitchen Fit-Out With MRMO
MRMO Technical Services builds kitchens in its own carpentry workshop in Dubai, so we can fix prices and hold lead times. A carpenter visits to measure and check wall condition and service points, then you get a dimensioned drawing and a written fixed-price quote that itemises materials, hardware, finish and installation. A small to medium kitchen fit-out with MRMO typically costs AED 12,000–45,000+. See our carpentry services, or WhatsApp photos of your kitchen to +971 56 619 3696 for an indicative range the same day.
If the job is part of a bigger refresh, we also handle interior renovation, plumbing work and electrical services.
[Buttons: WhatsApp Us → https://wa.me/971566193696 · Get a Quote → /get-a-quote/]
Frequently Asked Questions
How much does a kitchen fit-out cost in Dubai?
About AED 10,000–17,000 for a small galley kitchen in laminate, AED 25,000–48,000 for a mid-range L-shaped kitchen, and AED 50,000–98,000 or more for a villa kitchen with an island. Appliances, plumbing changes and permits are extra.
How much do kitchen cabinets cost per linear metre in Dubai?
Base units run about AED 1,500–2,200 per metre in laminate, AED 2,300–3,200 in PU lacquer and AED 2,800–4,500 in wood veneer, supplied and installed. Wall units cost less, from about AED 1,000 per metre.
Which kitchen worktop is cheapest in Dubai?
Granite is usually the cheapest stone, at about AED 600–1,000 per square metre installed. Mainstream quartz runs about AED 800–1,400, and sintered stone AED 1,500–3,000, before cut-outs and edges.
Do I need a permit to replace my kitchen in Dubai?
For new cabinets in the same layout, usually only a building management or developer work permit. Moving the sink, plumbing or walls also needs Dubai Municipality or Trakhees approval, depending on the area.
How long does a kitchen fit-out take?
Usually three to six weeks from approved drawing to handover. Workshop manufacture takes two to four weeks, and installation three to five days on site.
Is re-facing kitchen cabinets cheaper than replacing them?
Yes. New doors, handles, hinges and worktop cost roughly AED 600–1,400 per linear metre and take two to three days, provided the existing cabinet boxes are dry and solid.
